Apacer SAFD18 Series Industrial 1.8" SATA SSD Drives

Apacer Serial ATA Flash Drive (SAFD) is a solid-state disk (SSD) drive that contains a controller, embedded firmware, and flash media along with a male connector. Using NAND flash memory devices, the SAFD drive interfaces with the host allowing data to be seamlessly transferred between the host and the flash devices.

Apacer SAFD 18 Series drive is designed with a single-chip controller, offering capacities of up to 128 gigabytes and providing full support for the SATA II high-speed interface standard. It can operate at sustained access rates of up to higher than 200 megabytes per second, which is much more ideal for storage than traditional SATA based hard disk drive currently available in the market.

In addition to buffer management through dynamical allocation, Apacer SAFD 18 Series adopts the Apacer-specific static wear-leveling scheme to allow uniform use of all storage blocks, ensuring that the lifetime of a flash media can be significantly increased and the disk performance is optimized as well. Apacer SAFD 18 Series provides the S.M.A.R.T. feature that follows the SATA Rev. 2.6, ATA/ATAPI-7 specifications and uses the standard SMART command B0h to read data from the drive. This feature protects the user from unscheduled downtime by monitoring and storing critical drive performance.

Model	SAFD181 Series	SAFD18P Series
Interface	SATA II, 3.0 Gbps
Connector	(7+9) pin male
Flash Type	SLC Type	SLC Type
Capacity	8~32 GB	8~128GB
Sustained Read/Write  Performance	Sustained Read/Write:  up to 168/143 MB/sec	Sustained Read/Write:  up to 260/215 MB/sec
Operating Temp. (°C)	Standard: 0°C~70°C  Extended: -40°C~85°C
Storage Temp. (°C)	-40°C~100°C
General Datasheet	Apacer SAFD181 Series	Apacer SAFD18P Series