Home > Apacer Industrial > Apacer SATA SSD (2.5")

For OEM Project Inquiries: oem@e-itx.com
For Reseller Inquiries: reseller@e-itx.com
For General Sales Inquiries: sales@e-itx.com
or give us a call at (510) 770-9419 to discuss your project requirements.

Apacer SAFD25 Series Industrial 2.5" SATA SSD Drives

Apacer Serial ATA Flash Drive (SAFD) is a solid-state disk (SSD) drive that contains a controller, embedded firmware, and flash media along with a male connector. Using NAND Flash memory devices, the Apacer SAFD series drive interfaces with the host allowing data to be seamlessly transferred between the host and the flash devices.

Apacer SAFD Series drive is designed with a single-chip controller,  offering capacities of up to 256 gigabytes and providing full support for the SATA II high-speed interface standard. It can operate at sustained access rates higher than 200 megabytes per second, which is much faster than any other traditional SATA-based hard disk drive currently available in the market.

In addition to buffer management through dynamical allocation, the Apacer SAFD series adopts the global wear-leveling scheme to allow uniform use of all storage blocks, ensuring that the lifespan of a flash media can be significantly increased and the disk performance is optimized as well. Apacer SAFD series provides the S.M.A.R.T. feature that follows the SATA Rev. 2.6, ATA/ATAPI-7 specifications and uses the standard SMART command B0h to read data from the drive. This feature protects the user from unscheduled downtime by monitoring and storing critical drive performance.

 Model Apacer SAFD255 Series  Apacer SAFD25P Series  Apacer SAFD25P-M Series
Interface SATAII, 3.0 Gbps
 Connector (7+15) pin male
 Physical Form Factor (Inch) 2.5"
 Flash Type SLC Type  MLC Type
 Capacity 8GB-64GB  32GB~256GB  8GB~128GB

 Sustained Read/Write

 Performance

Sustained Read/Write:

Up to 230/175 MB/sec

 Sustained Read/Write:

 Up to 256/230 MB/sec

 Sustained Read/Write:

 Up to 260/220 MB/sec

 Operating Temp. (°C) Standard Temp. : 0°C to 70°C

Extended Temp. : -40°C to 85°C

 Storage Temp. (°C) -40°C to 100°C

 Shock/Vibration

Shock: 1500g (approx.)

 Vibration: 15g (approx.)

 MTBF >2,000,000 (hrs)  >1,000,000 (hrs)
 Support Voltage 5.0V +/- 5%
General Datasheet Apacer SAFD255 Series Datasheet Apacer SAFD25P Series Datasheet Apacer SAFD25P-M Series Datasheet


Apacer SAFD25P (SLC)
SATA II 3.0Gbps Interface
Industrial grade SLC NAND Flash
Sustained Write: up to 265MB/sec
Sustained Read: up to 230MB/sec
Support Operating Temp: 0°C~70°C
Apacer SAFD25P-M (MLC)
SATA II 3.0Gbps Interface
Industrial Grade MLC NAND Flash
Sustained Read: up to 245MB/sec
Sustained Write: up to 205MB/sec
Support Operating Temp: 0°C~70°C
SAFD25 Series Legacy Products