For OEM Project Inquiries: email@example.com
For Reseller Inquiries: firstname.lastname@example.org
For General Sales Inquiries: email@example.com
or give us a call at (510) 770-9419 to discuss your project requirements.
64GB Apacer SAFD18P series Industrial 1.8' SATA SSD Drives SLC Type 5V ET (APS18P6A064G-CCW)
The Apacer 64G SAFD18P 5V Extended Temperature (APS18P6A064G-CCW) is a solid-state disk (SSD) drive that contains a
controller, embedded firmware, and flash
media along with a male connector, supports -40 to 85-degree C extended
operating temperature range. Using NAND flash memory devices, the SAFD
drive interfaces with the
host allowing data to be seamlessly transferred between the host and the flash
The SAFD 18P drive is designed with a single-chip controller, offering
capacities of up to 128 gigabytes and
providing full support for the SATA II high-speed interface standard. It can
operate at sustained access rates
of up to higher 200 megabytes per second, which is much faster than any other
solid-state or traditional SATA drive
currently available on the market.
In addition to buffer management through dynamical allocation, the SAFD 18P
adopts the Apacer-specific
static wear-leveling scheme to allow uniform use of all storage blocks, ensuring
that the lifetime of a flash
media can be significantly increased and the disk performance is optimized as
well. The SAFD 18P provides
the S.M.A.R.T. feature that follows the SATA Rev. 2.6, ATA/ATAPI-7
specifications and uses the standard
SMART command B0h to read data from the drive. This feature protects the user
from unscheduled downtime
by monitoring and storing critical drive performance.
Specifications for Apacer SAFD18P Series Industrial Grade Extended Temp. SLC NAND Flash
SATA Solid State Drive (SSD).
Please contact us at firstname.lastname@example.org for
inquiries and more details.